¶ Queclink GL320MG
The Queclink GL320MG is a sturdy, simple panic button. Often used as a fixed button, but can also be used to carry it on-person.
Device information according to Queclink: LTE Cat M1/NB2 GNSS tracker with a user-friendly panic button for personal safety management and asset monitoring applications.
| manufacturer | Queclink |
|---|---|
| device type | GL320MG |
| protocol | Air Interface Protocol |
| size | 39.9 x 26.7 x 77.9 mm |
| weight | 93 g |
| battery capacity | 2600 mAh |
| IP rating | IPX5 Compliant |
| SIM slot | Standard SIM |
| communication |
Cat M1: LTE-FDD:B1/B2/B3/B4/B5/B8/ B12/B13/B18/B19/B20/B25/B26/ B27/B28/B66/B85 Cat NB2: LTE-FDD:B1/B2/B3/B4/B5/B8/ B12/B13/B18/B19/B20/B25/B28/ B66/B71/B85 EGPRS: 850/900/1800/1900MHz |
| speech and sound | n/a |
| vibration | yes |
¶ Features
| Category | Feature | Available | Notes |
|---|---|---|---|
| alarm | SOS | yes | SOS button |
| man down | no | ||
| timer | no | ||
| rip cord | no | ||
| communication | voice | no | |
| on screen message | no | ||
| tracking | satellite | yes | u-blox All-in-One GNSS receiver |
| beacon | no | ||
| others | battery event | yes | low battery |
| charging event | yes | docked, undocked | |
| quick button | no |
¶ Configuration options
The platform offers an easy to use configuration interface to configure this device over the air. The following configuration options are available.
| Category | Feature | Explanation |
|---|---|---|
| General | Power off button enabled | When enabled, the power button can be used to power down the device. Otherwise, it is only possible to power it down via the Cuebly platform. |
| SOS button | Time to alarm | Determines how long the button should be pressed before an alarm is created. |
| Periodic positioning | Interval | Determines the interval in which GPS positions are refreshed and sent. When there is no new GPS fix, the last-known position will be sent. |
¶ Settings to connect to the platform
Use the OTA configuration feature in the Cuebly platform, use SMS, or configure the following parameters using the manufacturer's configuration software. Make sure the device is awake and able to connect over the internet.
AT+GTSRI=gl320m,3,,2,app.cuebly.com,8488,,0,,6,1,0,0,,,FFFF$
AT+GTBSI=gl320m,iot.tele2.com,,,,,,3,0,0,0,,,,,FFFF$