¶ Eview EV-04
The Eview EV-04 is a small personal alarm device from Eview GPS. It is a small and simple device that comes with various accessories like a lanyard, belt clip, and docking station. It is available in two colors, black and white.
| manufacturer | Eview GPS |
|---|---|
| device type | EV-04 |
| protocol | Minifinder |
| size | 66 x 47 x 17 mm |
| weight | 53 g |
| battery capacity | 950 mAh |
| IP rating | IP67 |
| SIM slot | nano SIM |
| communication | AU/SA: B1/B3/B5/B7/B28 EU: B1/B3/B7/B8/B20 North America: B2/B4/B5/B7/B12/B13/B17 |
| speech and sound | microphone, speaker |
| vibration | yes |
| NFC | no |
| BLE | yes, but not yet supported by Cuebly |
| Wifi |
for communication: yes for positioning: not yet supported by C |
¶ Features
| Category | Feature | Available | Notes |
|---|---|---|---|
| alarm | SOS button | yes | |
| man down | yes | Tilting, non movement, angle | |
| timer | no | ||
| rip cord | no | ||
| proximity | no | ||
| communication | voice | yes | two way |
| on screen message | yes | ||
| tracking | satellite | yes | GPS, Glonass, Galileo, Beidou, SBAS, QZSS, DGPS |
| beacon | no | ||
| others | battery event | yes | low battery |
| charging event | no | ||
| quick button | no |
¶ Configuration options
The platform offers an easy to use configuration interface to configure this device over the air. The following configuration options are available.
| Category | Feature | Explanation |
|---|---|---|
| General | Enabled call end | When enabled, the user can end calls. |
| Enable auto-answer | When enabled, the device will automatically answer incoming calls. | |
| Number of rings | Determines how many rings before the device will answer automatically. | |
| Wifi | Enabled | Enabled wifi communication |
| Networks | Add up to three wifi networks to connect with. Networks without a password are not supported by the device. | |
| Sound | Discrete mode | When enabled, the device will not make any sounds, only vibrations. This is used for when a silent alarm is made in cases with agressors or other intimidating situations. |
| Voice prompt on SOS button event | The device will tell you when the SOS button has been pressed. | |
| Voice prompt on man down event | The device will tell you when the man down alarm has been made. | |
| Voice prompt on low battery | The device will tell you when the battery is low. | |
| Voice prompt language |
Available in:
|
|
| Man down | On horizontal tilt - Enabled | Enables the tilt alarm. |
| On horizontal tilt - Angle | The angle the device has to be in to trigger an alarm. | |
| On horizontal tilt - Time to pre-alarm | The time the device should be in an angle before the pre-alarm is triggered. | |
| On horizontal tilt - Duration of pre-alarm | This determines how long the pre-alarm sounds before the alarm is made. This defaults to 15 seconds by the device. | |
| No movement - Enabled | Enables the no-movement alarm | |
| No movement - Time to pre-alarm | The time the device should be inactive before the alarm is made. | |
| No movement - Duration of pre-alarm | This determines how long the pre-alarm sounds before the alarm is made. Since the device does not support this, the alarm will be made directly after the “time to pre-alarm”. | |
| Free fall - Enabled | Enables the free fall alarm | |
| Free fall - Motion sensitivity | Determines the size of the fall before the pre-alarm starts. | |
| Free fall - Duration of pre-alarm | This determines how long the pre-alarm sounds before the alarm is made. This defaults to 15 seconds by the device. | |
| Emergency numbers | Emergency numbers |
3 custom numbers or other devices. All the numbers that are specified here, are automatically also trusted by the device. |
| Trusted numbers | Usage | Specify if anyone may call the device or only the trusted numbers. When the device is connected to an alarm receiving center, the ARC will always be added to the trusted numbers. |
| Trusted numbers | 5 custom number or other devices | |
| Periodic positioning | Interval | Specifies the interval in which the device will send its position. |
¶ Settings to connect to the platform
Use the OTA configuration feature in the Cuebly platform or configure the following parameters using the manufacturer's configuration software. Make sure the device is awake and able to connect over the internet.
- Tracking Settings
- General
- Heart-beat interval = ON, 360s
- Server type
- Enabled = ON
- Protocol = TCP
- Server IP = app.cuebly.com
- Server Port = 8487
- APN New
- Add your APN here
- General
